NANO-QM770 | EPIC Embedded Board - i3/i5/i7


Embedded Board im EPIC-Formfaktor mit 4. Gen. Intel® mobile Prozessor. 1600/1333 MHz DDR3 & DDR3L SDRAM bis 8 GB. Displays werden über VGA, LVDS und HDMI angeschlossen. Netzwerkanbindung über GbE LAN. Schnittstellen sind USB 2.0 und USB 3.0 und intern KB/MS, RS-232, RS-422/485, USB 2.0 und Digitale Ein-/Ausgänge. Weitere Anschlüsse für iRIS Remote Management Modul, TPM, SMBus und Lüfter. Speicheranbindung über SATA 6Gb/sec (RAID 0/1). Erweitern lässt sich das EPIC-Board über Mini-PCIe und PCIe/104. Die Eingangsspannung beträgt 12 VDC, die Betriebstemperatur liegt zwischen -10°C und 60°C.

Varianten



Highlights



  • EPIC SBC with Socket G2 for Intel® 22nm mobile processor
  • Triple independent display supports with dual HDMI+DVI/dual HDMI+LVDS (HDMI V1.3a
  • compliant)
  • 1066/1333/1600 MHz DDR3 SDRAM supports up to 8GB
  • Supports three COM, four USB 3.0, two SATA 6Gb/s and audio
  • Intel® GbE LAN with Intel® AMT 8.0 supported
  • IEI One Key Recovery solution allows you to create rapid OS backup and recovery

 

Hauptmerkmale

Spezifikationen


CPUSocket G2 for Intel® 3rd generation 22nm mobile processor
PCHIntel® QM77
BIOSUEFI BIOS
MemoryOne 204-pin 1066/1333/1600 MHz DDR3
SO-DIMM supported (system max. 8GB)
GraphicsIntel® HD Graphics Gen 7 with 12 execution units
DirectX 11, OpenGL 3.1, OpenCL 1.1
Display OutputAnalog CRT and DVI by DVI-I connector
(up to 2048x1536@75Hz)
18/24-bit dual channel LVDS (up to 1920x1200@60Hz)
Dual HDMI (HDMI signal only) supports resolution up to 1080p (up to 1920x1200@60Hz)
EthernetLAN1: Intel® 82583V PCIe controller
LAN2: Intel® 82579 PHY with Intel® AMT 8.0 support
Super I/OFintek F81866
I/O Interface2 x SATA 6Gb/s with 5V SATA power connector
2 x USB 2.0
4 x USB 3.0
2 x RS-232
1 x RS-422/485
1 x 6-pin header for KB/MS
TPM2 x 10-pin LPC pin header for TPM
AudioRealtek ALC662 HD codec
Expansions1 x PCIe Mini card slot (compatible with mSATA device)
Watchdog TimerSoftware programmable supports 1~255 sec. system reset
Programmable I/O8-bit digital I/O
Fan Connector1 x 4-pin CPU fan connector
1 x 3-pin system fan connector
Power supply12V only, AT/ATX support
Power Consumption12V@4.89A (Intel® 1.8GHz CPU with 1333MHz DDR3 4GB memory)
Operating Temperature-10°C ~ 60°C
Storage Temperature-20°C ~ 70°C
Operating Humidity5% ~ 95%, non-condensing
Dimensions115 mm x 165 mm
WeightGW: 850g/NW: 350g