WAFER-BT
Embedded Board im 3,5-Zoll-Formfaktor mit Intel® 22nm Atom/Celeron SoC onboard. Bis zu 8 GB DDR3L RAM möglich, bis zu 4 GB für die Celeron N2807-CPU. Displays werden mit VGA, iDP und LVDS angeschlossen. Netzwerkanbindung über GbE LAN. Schnittstellen sind USB 2.0, USB 3.0, RS-232 und intern KB/MS, USB 2.0, RS-232, RS-422/485 und Digitale Ein-/Ausgänge. Weitere Anschlüsse für Lüfter und SMBus sind vorhanden. Massenspeicheranbindung mit SATA 3 Gb/sec.
Erweitern lässt sich das Embedded Board über Mini-PCIe.
Die Eingangsspannung beträgt 12 VDC, AT/ATX-Modus wird unterstützt. Die Betriebstemperatur liegt zwischen -20°C und 60°C.
- 3.5” SBC supports Intel® 22nm Atom™ on-board SoC
- Dual independent display support
- 1333/1066 MHz 1.35V DDR3L SDRAM supported up to 8GB
- COM, USB 3.0, SATA 3Gb/s, 2xPCIe Mini, mSATA and Audio support
- IEI One Key Recovery solution allows you to create rapid OS backup and recover
Hauptmerkmale
Spezifikationen| CPU | Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W) Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W) Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W) Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W) Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core, 512KB cache, TDP=5W) Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W) Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W) Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W) |
| BIOS | AMI UEFI BIOS |
| Memory | One 204-pin 1066/1333 single-channel DDR3L SO-DIMM supported (system max. 8GB) |
| Graphics Engine | Intel® HD Graphics Gen 7 Engines with 4 execution unit supports DX11.1, OpenGL 4.2 and OpenCL1.2 |
| Display Output | Dual Independent Display 1 x VGA (Resolution: 1600x1200@60Hz) 1 x 24-bit dual-channel LVDS connector (1920x1200@60Hz) 1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160@60 Hz) |
| Ethernet | LAN1: Intel® I210-AT PCIe controller with NCSI support LAN2: Intel® I211-AT PCIe controller |
| Super I/O | Fintek F81866 |
| Embedded Controller | ITE IT8528E |
| I/O Interface | 1 x PS/2 KB/MS2 x SATA 3Gb/s with 5V SATA power connector (no RAID) 1 x USB 3.0 (on rear I/O) 5 x USB 2.0 (1 on rear I/O, 4 by pin header) 1 x RS-422/485 (by pin header) 3 x RS-232 (1 on rear I/O, 2 by pin header) |
| SMBus | 1 x 4-pin (1x4) wafer |
| Audio | Realtek ALC662 HD codec 1 x Analog audio by 10-pin (2x5) header |
| Front Panel | 1 x 6-pin wafer for power LED & HDD LED 1 x 2-pin wafer for power button 1 x 2-pin wafer for power reset |
| LAN LED | 2 x 2-pin (1x2) header |
| Expansion | 1 x Full-size PCIe Mini card slot with mSATA support (SATA2 and mSATA share SATA signal) 1 x Half-siza PCIe Mini card slot |
| Digital I/O | 8-bit digital I/O (4-bit input, 4-bit output) |
| Fan Connector | 1 x 4-pin CPU fan connector 1 x 4-pin system fan connector |
| Power Supply | 12V DC input only (AT/ATX support) |
| Watchdog Timer | Software programmable, supports 1~255 sec. system reset |
| Power Consumption | +12V@1.45A (Intel® Celeron® J1900 CPU 1 x 8GB 1333 MHz DDR3 memory) |
| Operating Temperature | -20°C ~ 60°C |
| Storage Temperature | -30°C ~ 70°C |
| Operating Humidity | 5% ~ 95%, non-condensing |
| Dimensions | 146mm x 102mm |
| Weight | GW:600g / NW:250g |
Varianten
WAFER-BT-N29301-R20
3.5" SBC Intel® 22nm Quad-Core Celeron™ N2920 1.86GHz (7.5W) on-board SoC with VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA, mSATA, COM, Audio and RoHS
WAFER-BT-N28071-R20
3.5" SBC supports Intel® 22nm Dual-Core Celeron™ N2807 1.58GHz (4.5W) on-board SoC with VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA, mSATA, COM, Audio and RoHS
WAFER-BT-J19001-R20
3.5" SBC supports Intel® 22nm Quad-Core Celeron™ J1900 2.0GHz (10W)on-board SoC with VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA, mSATA, COM, Audioand RoHS