NAD11-103-SD

Vortex86DX2 (500MHz) PC/104 CPU Module 256MB/4S/4USB/I²C/VGA/LCD/LVDS/LAN/SD

  • PC/104 Vortex86DX2 500MHz CPU Module with 256MB RAM
  • VGA, LCD, LVDS, LAN, 4xCOM, 4xUSB, SD
  • Operating temperature -20°C~70°C
Artikelnummer: 505473

Spezifikationen NAD11-103-SD

ProcessorDM&P SoC CPU Vortex86DX2 500MHz
Real Time Clock with Lithium Battery Backup
CacheL1:16K I-Cache, 16K D-Cache
L2 Cache:256KB
BusPC/104 Standard Compliant
System Memory256MB DDR2 Onboard
Watchdog Timer 0&1 SetsSoftware programmable from 30.5μ seconds to 512 sec.
x2 sets(Watchdog 1 fully compatible with M6117D)
VGAIntegrated 2D VGA chip with dual display support
(VGA + TTL /VGA + LVDS)
VGA: Maximum resolution up to 1280x1024 @ 60Hz
LVDS: Maximum resolution up to 1024x768 @ 60Hz
Single channel 18-bit LVDS
LANIntegrated 10/100Mbps Ethernet
Flash Disk SupportOnboard 4MB SPI Flash Disk
SD Card
Touch controllerPS/2 interface (Optional)
I/O InterfaceRS232 port x3
RS-232/485 port x1
USB port (Ver. 2.0) x4
USB HotSWAP x1(Optional)
16-bit GPIO port x1
10/100Mbps Ethernet port x1
I²C port x 1
Connectors2.0mm 44-pin box header for LCD x1
2.0mm 20-pin box header for 16-bit GPIO x1
2.0mm 16-pin header for LVDS x1
2.0mm 10-pin box header for VGA x1
2.0mm 10-pin box header for USB x2
2.0mm 10-pin box header for RS232 x4
2.0mm 8-pin header for Ethernet x1
2.54mm 2-pin header for Reset x1
2.54mm 5-pin box header for Keyboard x1
2.54mm 5-pin header for Mouse x1
2.54mm 4-pin header for -5V, -12V +12V, GND x1
1.25mm 6-pin wafer for I²C x1
1.25mm 4-pin wafer for Touch Screen x1(Optional)
Power RequirementSingle Voltage +5V @ 790mA
Weight110g
Dimensions90mm x 96mm (3.54 x 3.77 inches)
Operating Temp.-20°C~ + 70°C
-40°C ~ 85°C (Optional)
Angebot anfordern
Statusverfügbar

Seite 28 von 250