HYPER-BW-N3-R10

Pico-ITX SBC with Intel® Celeron® 14nm quad-core N3160 up to 2.24GHz (6W) on-board SoC with dual Mini HDMI, PCIe GbE, M.2, USB 3.0, SATA 6Gb/s, COM, Audio and RoHS

  • Intel® Celeron® 14nm quad-core N3160 up to 2.24GHz
  • IEI jumper-less function
  • Dual independent display support
  • 1333/1600 MHz 1.35V DDR3L SDRAM up to 8 GB supported
  • COM, USB 3.0, SATA 6Gb/s and Audio support
  • 1 x M.2 B key slot for expansion possibility
  • IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Artikelnummer: 504721

Spezifikationen HYPER-BW-N3-R10

BIOSAMI UEFI BIOS
MemoryOne 204-pin 1333/1600 MHz single-channel DDR3L SDRAM unbuffered SO-DIMM slot support up to 8 GB
Graphics EngineIntel® HD Graphics Gen 8 Engine with 16 low-power execution units
supporting DX11.1, OpenGL 4.2 and OpenCL1.2
Display OutputDual independent display
2 x Micro HDMI (up to 3840x2160@30Hz)
EthernetLAN1: Realtek RTL8111 controller
External I/O Interface1 x USB 2.0
1 x USB 3.0
Internal I/O Interface1 x RS-232 (1x9 pin, P=1.25)
1 x SATA 6G/s with 5V SATA power connector (No RAID)(SATA port0)
2 x USB 2.0 (2x4 pin, P=2.0)
Audio1 x HD Audio (2x5 pin)
Front Panel1 x Front panel(1x10 pin, power LED, HDD LED, power buttom, reset buttom)
LAN LED1 x LAN LED (1x2 pin)
Expansion1 x M.2 (B Key)
Fan Connector1 x Smart fan connector (1x4 pin)
Power Supply12V DC input only
1 x Power terminal block (1x2 pin)
Support AT/ATX mode
Power Consumption12V@1.52A (Intel® Pentium® processor N3710 with 8 GB 1600 MHz DDR3L memory)
Watchdog TimerSoftware programmable supports 1~255 sec. system reset
Operating Temperature -20°C ~ 60°C
Storage Temperature-30°C ~ 70°C
Operating Humidity5% ~ 95%, non-condensing
Vibration3G
Dimensions100mm x 72mm
WeightGW:30g / NW:250g
Angebot anfordern
Statusregular

Seite 38 von 97