PICMG 1.3 with LGA1156 socket for Intel® Core processor with VGA, Dual Intel GbE, SATAII, COM, USB 2.0 and Audio, RoHS

  • PICMG 1.3 with LGA1156 socket for Intel® Core™ i7/ i5/ i3 processor
  • Support dual-channel 8GB (max.) 800/1066/1333 HMz DDR3 SDRAM
  • Intel® GbE LAN controller with Intel® AMT 6.0 support
  • Fourteen USB 2.0 ports and two COM ports
  • Six SATA ports with RAID function
  • IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Artikelnummer: 498697

Spezifikationen PCIE-Q57A-R10

CPULGA1156 socket supports Intel® Core™ i7/i5/i3 (Quad Core/Dual Core) processor
System ChipsetIntel® Q57
Memory2 x 240-pin dual-channel DDR3 1333/1066/800 MHz up to 8GB
Display OutputVGA Intgrated in Intel® Q57
NoteThe Intel® quad-core processor (e.g., i7-860 and i5-750) is a discrete processor
which does not integrate a graphics engine. If a quad-core processor is used on the
motherboard, an additional graphic card must be installed in order to support display
output. Otherwise, the display will show “No display output” when connected to the onboard
VGA port.
EthernetIntel® 82583V PCIe controller
Intel® 82578DM with Intel® AMT 6.0 supported by iEZman software UI.
I/O Interfaces2 x RS-232
1 x FDD
1 x LPT
1 x 6-pin wafer on board for KB/MS
14 x USB 2.0 (2 on rear side, 12 on board by pin-header)
6 x SATA II (RAID 0, 1, 5, 10)
Infrared Interface1 x 5-pin infrared connector
Digital I/O8-bit Digital I/O (4-bit input/4-bit output)
Audio7.1 channel supports dual audio streams via Realtek ALC888 audio kits
Super I/OITE IT8718F
Watchdog TimerSoftware Programmable support 1~255 sec. system reset
Fan Connector1 x 4-pin CPU fan connector
1 x 4-pin PCH fan connector
Power SupplyATX Power (Support AT/ATX mode)
Power Consumption3.3V@0.89A, 5V@4.62A, 12V@0.51A, Vcore_12V@4.35A, 5VSB@0.14A
(Intel® Core™ i5 660 3.3GHz CPU with two 2GB 1066MHz DDR3)
TemperatureOperation: 0°C ~ 60°C (32°F~140°F)
HumidityOperation: 5% ~ 95%, non-condensing
Dimensions338 mm x 126 mm
WeightGW: 1.1kg

Seite 42 von 42